Overhaul update
![This is the outer slide of the cross head for the Right hand combination lever. On the 19th we decided to check if it was the right way up - it wasn’t! This led to the combination lever being about 6 or 7mm out of line with its union link at the bottom. After a bit of dismantling to release the offending part we rotated it through 180 degrees and reassembled everything and all was well as the next pic shows.](https://staniermogulfund.org.uk/wp-content/uploads/cache/2021/08/1/3548427240.jpg)
This is the outer slide of the cross head for the Right hand combination lever. On the 19th we decided to check if it was the right way up - it wasn’t! This led to the combination lever being about 6 or 7mm out of line with its union link at the bottom. After a bit of dismantling to release the offending part we rotated it through 180 degrees and reassembled everything and all was well as the next pic shows.